Rp 2.650.000 Rp 2.475.000
Radio Rig Icom IC-2300H
The ICOM IC-2300H, 144MHz mobile, retains the same basic features from the popular IC-2200H; powerful 65W output power, simple-to-use user interface, built-in CTCSS and DTCS encoder/decoder, etc. While keeping those basic features, the IC-2300H is packed in to a smaller body (in depth) than the IC-2200H.
Output Power |
65W, 25W, 10W, 5W | |
RX Frequencies: |
144-148MHz | |
Memory Channels: |
207 (includes 6 scan edges & 1 call) |
Simple Operation
The IC-2300H’s basic panel layout includes a simple user interface. A large LCD with 6 alphanumeric characters offers a good viewing angle for mobile operation. Select either the amber, yellow or green backlight color. The bottom of the display indicates the available front panel functions.
Built Tough
Rough roads won’t stop the IC-2300H from working. This mobile has been tested to and has passed the latest MIL-STD 810 G specifications including shock, vibration and temperature tests. The rugged aluminum diecast chassis provides effective heat dissipation and keeps RF output even during high duty cycle continuous transmission.
Multiple Scan Functions
The IC-2300H supports various scan types for maximum reception to suit your needs. The DMS (Dynamic Memory Scan) system allows you to scan selected banks from 10 memory banks by simply adding and deleting bank links.
Full scan
Programmed scan
Memory scan
Bank scan
Bank link scan (DMS)
Skip scan
Priority scan
Tone scan
Additional Features
Built-in CTCSS and DTCS encoder/decoder for quiet standby and repeater access
Power supply voltage display
4.5W (typical) loud audio
Reduced depth dimensions
DTMF autodial
Time-out timer
Specifications
| General | |||
|---|---|---|---|
| Frequency coverage |
|
||
| Mode | F2D, F3E | ||
| No. of memory channels | 207 (including 6 scan edges and 1 call) | ||
| Frequency resolution | 5, 6.25, 10, 12.5, 15, 20, 25, 30, 50kHz | ||
| Operating temp. range | –20°C to +60°C;
14°F to +140°F; |
||
| Frequency stability | ±3ppm (–10°C to +60°) | ||
| Power supply requirement: | 13.8V DC ±15% | ||
| Current drain (at 7.4V DC):
Transmit at 65W Receive Stand-by Receive Max. audio |
11A0.4A1.5A | ||
| Antenna impedance | 50Ω (SO-239) | ||
| Dimensions (W×H×D) (projections not included) |
140×1.57×162 mm; 5.51×1.57×6.38 in | ||
| Weight (approx.) | 1Kg; 2.43lb | ||
| Transmitter | |
|---|---|
| Modulation system | Variable Reactance |
| Output power | 65/25/10/5W |
| Spurious emissions | Less than –60dBc (High, Mid) |
| Max. deviation | ±5.0/2.5 kHz wine/narrow) |
| Microphone impedance | 60Ω (8-pin modular) |
| Receiver | |
|---|---|
| Receiver system | Double superheterodyne |
| Intermediate frequency | 46.35MHz/450kHz (1st/2nd) |
| Sensitivity | Less than 0.18μV at 12dB SINAD |
| Squelch Sensitivity | Less than 0.13μV at threshold |
| Selectivity
Wide Narrow |
More than ±6kHz/6dBMore than ±14kHz/60dBMore than ±3kHz/6dBMore than ±9kHz/55dB |
| Spurious rejection | More than 60dB |
| Audio Output Power | 4.5W (typ.) |
| External speaker connector | 2-conductor 3.5(d) mm 1/8″/4Ω |
Applicable U.S. Military Specifications
| Standard | MIL 810 G | |
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Tempurature | 501.5 | I, II |
| Low Tempurature | 502.5 | I, II |
| Tempurature Shock | 503.5 | I-B |
| Solar Radiation | 505.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
Hand microphone, HM-133V
DC power cable, OPC-1132
Mounting bracket kit
Microphone hanger and spare fuses
Ulasan
Belum ada ulasan.